Computer Aided Drafting and Design (CADD)

Montana Engineering Drawings

• Standard Drawings

NRCS Computer Aided Design (CAD) Standards

If you encounter any problems with the files provided on this page, please contact Bruce Krueger at 406-587-6834.

The following documents require Acrobat Reader.

National Engineering Handbook, Part 641 Drafting and Drawings
Chapter 1 Computer Aided Design (CAD) Standards (PDF; 3 MB)

National Engineering Manual (NEM), Part 541 Drafting and Drawings
NEM Part 541 (PDF; 337 KB)

Other NRCS CADD Sites

In using any standard drawings, the person(s) responsible for design and approval shall verify that the standard drawing is adaptable to the site and the design limitations of the drawing are not exceeded.

Last Modified: 01/13/2012