|
| |
Engineering Software
The public can obtain NRCS software
from the NRCS
Technical Tools Website. The software provided in the
table below are for use on NRCS platforms. The public should download the
non-NRCS versions at the site listed above.
NRCS employees can access NRCS nationally
approved software from the
Information Technology Services staff (ITS). Support for NRCS nationally approved engineering software should be obtained
through the State Conservation Engineer.
The table below contains the approved list of NRCS engineering software for use in
Montana. This list is dynamic and will be updated as existing software is
revised and new software is added to the list.
If you encounter any problems with the files provided on this
page, please contact Bruce Krueger at 406-587-6834.
Montana Engineering Software List
| Name |
Description |
Version |
Date |
| AgPipe |
Pipeline design program. |
0.21.1.00 |
April 9, 2004 |
| CPED |
Irrigation center pivot evaluation/design. |
4.0.0.6 |
February 24, 2005 |
| EFH2 |
Estimating runoff and peak discharge. |
1.1 |
August 4, 2003 |
| EFM2 |
Estimating runoff and peak discharge. |
1.10.0.9 |
February 11, 2003 |
| FIRI |
Farm irrigation rating index |
0.1.01.01 |
October 17, 2003 |
| Hydraulics Formula |
Hydraulic equations frequently used during soil and water conservation
activities. |
2.2.1.1 |
February 13, 2004 |
| IWR |
Crop consumptive use program. |
1.0.0.02 |
September 9, 2003 |
| ND Pipe Deflect |
Modified Iowa Formula to estimate Vertical Deflection of buried flexible
pipe caused by earth and live loads. |
1.2 |
February 11, 2003 |
| ND Pipe Design |
Design of pressure pipelines used for sprinkler, trickle, livestock and
other water supplies. |
1.44 |
February 11, 2003 |
| Ohio Engineering |
Engineering software developed by the Ohio NRCS for Design of
Conservation practices. |
5.2.2 |
November 11, 2003 |
| Rotate |
Rotates Geodimeter raw survey file. |
1.0 |
October 22, 1987 |
| Sec2dxf |
Converts a ASCII txt file of a section or profile data to a Autocad dxf
format. |
1.1 |
August 1998 |
| Snotemm |
Geodimeter survey note reduction program. |
4.4 |
March 12, 1997 |
| SRFR |
SRFR is a tool to help identify the optimum surface irrigation
efficiencies from border, basin, and furrow irrigation. |
4.06.0.9 |
February 11, 2003 |
| WinTR55 |
Urban Hydrology for Small Watershed. |
1.00.08 |
September 9, 2008 |
| Winflume |
Flume design program. |
1.05.0023.01 |
April 22, 2004 |
| WinTR20 |
Project formulation for Hydrology. |
1.11 |
October 241, 2008 |
| Xyz2dxf |
Converts xyz survey file to a Autocad dxf format. |
2.0 |
January 2002 |
The table below contains the approved list of Montana NRCS Engineering Spreadsheets.
This list is dynamic and will be updated as existing Spreadsheets are revised or new Spreadsheets
are added. Engineering computer Spreadsheets, developed by Montana NRCS employees not on the approved list should be sent to
the State Conservation Engineer for review and approval.
The Engineering Spreadsheets in the following table require Microsoft Excel.
Montana Engineering Spreadsheet List
| Name |
Description |
Version |
Date |
|
Collapse (XLS; 96 KB) |
Pipe collapse pressure and air valve sizing. |
1.0 |
March 2009 |
|
Pivot Design
(XLS; 108 KB) |
Pivot planning and design spreadsheet. |
2.3a |
March 2009 |
Last Modified:
09/02/2009
| |
|
About Us
Back to Top