Protect Your Home
Hillside lots that have been damaged by fire or are located in a fire-damaged
watershed can be susceptible to erosion, drainage, and other runoff-related
problems. Torrential or prolonged rains cause the most damage. To treat surface
drainage problems, you will first need to identify the sources of surface water
(runoff) flowing onto or over your property. Walk outside and around your home.
As you walk, observe the “lay” of your lot and the surrounding properties. Also,
observe your roof and driveway. Is your home on top of a hill where all surface
waters drain away from your home? If so, you will be concerned with holding
topsoil on your property. Few homeowners live on top of a hill so it is more
likely that water will flow onto your property from an adjacent hillside. Where
will the water concentrate and how can you control the sediment that is carried
with the water?
Gutters and Downspouts Direct Roof Runoff
Be sure your roof is properly fitted with gutters and downspouts that will
release water onto a non-erodible surface such as a paved driveway. Or you can
connect downspouts firmly to solid plastic pipe that will carry water down-slope
away from your home to a place where it will be released safely, such as a paved
roadside or storm drain ditch.
Because twigs, pine needles, and leaves can clog gutters and downspouts, the
use of gutter guards that are made of one-quarter- to one-half-inch hardware
cloth screen is highly recommended. Clear your gutters regularly and inspect
them to ensure your roof runoff system is working properly.
Curbs and Berms Protect Sensitive Slopes
A concrete curb, a compacted earth berm, or other similar structure on the
outside edge of a driveway or building pad can direct runoff away from sensitive
slopes to an area where it can be released safely. The recommended height of the
berm is a minimum of 12 to 18 inches. A pipe drop may be used to carry runoff
down slope to a place where it can be released safely, such as a lined roadside
ditch or storm drain.
Lined Ditches Handle Road and Driveway Runoff
Roads and driveways can be graded toward a lined ditch or street-side gutter
designed to handle sheet flow water from paved surfaces and uphill slopes. At
specific intervals along the main road, water may be transported under the road
through a culvert and released safely onto a non-erodible surface. An energy
dissipater, such as a rock lined outlet, can serve this purpose where slope is
minimal. In steeper areas or where large volumes of water may accumulate, other
precautions may be needed to prevent washouts or localized flooding.
Proper Grading Promotes Good Drainage
Proper grading of your land helps prevent water from pooling around
foundations, flooding basements or below grade structural components, or
concentrating water into destructive volumes. In general, grade surfaces around
a home so runoff flows away from foundations at a minimum slope of one to two
feet for every 100 feet. Grade and compact surfaces evenly since water can
collect in depressions or channelize into destructive flows.
Drainage for Retaining Walls
Good drainage must be provided for solid construction retaining walls.
Properly placed weep holes and perforated pipe with a gravel backfill behind the
wall work well. The small openings between wood boards or non-grouted brick,
stone or concrete block retaining walls also serve this purpose. Many walls are
not designed for saturated soils or ponded water behind them and can break, tip
over, or slide if they don’t have good drainage behind them.
Runoff Diversions
A diversion may be needed to handle surface runoff flowing onto your property
from upslope. For slopes steeper than two percent, or where large amounts of
water are expected, the diversion channel will require an erosion resistant
lining. Direct water to a safe, non-erodible outlet and never directly onto the
downstream slope itself. Never direct water onto adjoining property without
consulting the owners. Always consult a qualified engineer to design water
diversion measures.
Maintenance
Regular maintenance of drainage systems will keep your drainage problems to a
minimum. Remember that regular maintenance saves time and money in the long run.
Maintenance should include the following items:
- Check gutters, downspouts and pipes during and after storms and remove
debris that might cause clogging.
- Regularly inspect, clean, and repair berms and ditches.
- Check for and repair any damage caused by burrowing animals.
- Seed and mulch or otherwise vegetate all bare areas, especially on
slopes.
Safety Measures
Do not start any work until you are sure that both above-ground and
underground utility lines will not be affected by your work. The location of
underground utility lines can be obtained by calling the Utility Notification
Center at 1-800-424-5555 or by calling your local utility companies. Also, do
not release runoff onto septic leach fields or at the base of structural
foundations.

A rock-lined channel and concrete barriers were built to protect a home in
the Dickson Creek area from debris flows and water erosion.

The barriers directed flows away from the home and driveway, while the rock
lining protected the channel itself from erosion. The system worked exactly as
it was designed to work.
< Back to NRCS Wildfire Rehabilitation
Assistance
|